Important: Visit VC Emergency for the Latest Fire Updates and Emergency Information.

Mountain Fire

Design

Step 2: Design

Applications related to replacing structures damaged or destroyed by the Wildfires will be given priority by Building and Safety. Every effort will be made to review your plans within two to three weeks. If you are interested, the Building and Safety Division has developed standardized plans for the construction of homes that requires minimal plan review time. When possible, applications for these homes will be processed by staff on the same day they are submitted. 

Existing footings, slabs, and foundation systems in fire-destroyed buildings are not typically permitted to be re-used. Homeowners interested in retaining their foundation are advised to discuss this issue early and in detail with the professional engineer who will be designing their replacement structure. For more information about re-using fire damaged foundation systems please see the resources below.  

During the design phase, it is important to determine if you can utilize your existing septic system or if you need to bring onsite wastewater treatment system (OWTS) into compliance with current codes. There are three basic permits for OWTS in Ventura County; construction or repair permits for conventional systems, construction or repair permits for alternative systems, and Certifications of existing systems. The size and design of the OWTS is dependent upon the design and size of the rebuilt home, so it is important to consider the OWTS at the earliest stages of the site layout. Information about Environmental Health Division’s Liquid Waste Program can be found here. 

The development standards that pertain to your property are based on zoning and any applicable overlays. You can find your zoning at the Planning Division’s What’s My Zoning page. Every property is unique, and you may need to speak with  Planning Division staff about the appropriate provisions related to your property.  

Design Steps

  1. Verify the condition of the property’s water well, reverse osmosis filter, and septic system if applicable.
  2. Consult with Liquid Waste Program Staff to discuss your septic system design.
  3. Determine the design standards that apply to your property.
  4. Meet with a design professional** to discuss and develop plans that are compliant with the current building code.
  5. Retrieve original plans, utilize standardized plans, or start from scratch.
  6. Finalize design and obtain a code compliant set of drawings. The new design does not need to use the floor plan or footprint of the previous building, however, to qualify for the waived expedited fees for building plan review, the design for the residential home must be similar in square footage and footprint.

* **Note: At a minimum, a simple home design would require the following design professionals: a designer, and a Calgreen and Energy consultant. More complex designs will require an architect, a civil engineer, a geotechnical engineer, and a Calgreen and Energy consultant. 

 Note: The majority of rebuilt homes in the burn areas will require a geotechnical engineer to evaluate the soils. A septic consultant may be required to evaluate the functionality of the existing septic system. 

Additional Resources

Translate Disclaimer

The vcrma.org website has been translated for your convenience using translation software powered by Google Translate. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace human translators. Translations are provided as a service to users of the Ventura.org website, and are provided “as is.” No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, or correctness of any translations made from English into any other language. Some content (such as images, videos, Flash, etc.) may not be accurately translated due to the limitations of the translation software.

The official text is the English version of the website. Any discrepancies or differences created in the translation are not binding and have no legal effect for compliance or enforcement purposes. If any questions arise related to the accuracy of the information contained in the translated website, please refer to the English version of the website which is the official version.